Heavy-duty cutting compound engineered to rapidly eliminate deep scratches, severe oxidation, water spots, and P1200-P1500 sanding marks. Restores clarity to heavily damaged paintwork with speed and precision.
FAST CUTTING COMPOUND STEP 1 is a high-performance, heavy-cut compound engineered for fast defect removal on heavily weathered or scratched paint finishes. Formulated with advanced diminishing micro-abrasives, it cuts aggressively through deep scratches, severe swirl marks, etching, and P1200-P1500 sanding scratches without scouring the clear coat or generating excessive heat.
Key Benefits:
Rapid Heavy Defect Removal: Quickly leveling heavy clear coat imperfections, oxidation, and severe scratches.
Advanced Micro-Abrasive Technology: Delivers fast, controlled cutting action that transitions smoothly into a workable polish finish.
Low-Dust & Silicone-Free: Minimizes dusting and body shop contamination while leaving no fillers behind for true, permanent results.
Ideal Pre-Polish Foundation: Prepares heavy paint correction surfaces for refinement with COMPOUND & POLISH or ADVANCED LAST POLISH.
Directions:
Wash, clay, and decontaminate the paint surface thoroughly before starting.
Shake well and apply 4–5 pea-sized drops onto a wool pad or heavy-cutting foam pad.
Spread product over a 2x2 ft area on low speed, then increase to medium-high speed with firm, overlapping passes.
Buff off residue with a clean, plush microfiber towel and inspect the surface before proceeding to Step 2 polishing.
